ATP fluorescence detector wifi type

Introduction to ATP fluorescence detector wifi type

ATP fluorescence detector wifi type is an upgraded product developed and launched by Shandong Holder Electronics. It has a large touch screen instead of traditional buttons. The operation uses a biochemical reaction method to detect the ATP content. The ATP fluorescence detector is based on the principle of firefly luminescence. The ATP rapid bactericidal effect detection method is based on the ATP (adenosinetriphosphate) triphosphonic acid acyl glycoside detection principle, and uses the "luciferase-luciferin system" to quickly detect adenosine triphosphate (ATP). The ATP swab contains a reagent that can lyse the cell membrane, which can release ATP in the cell, react with the specific enzyme contained in the reagent, generate light, and then use a fluorescent illuminometer to detect the luminescence value. The number of microorganisms is proportional to the luminescence value. Since all living cells contain a constant amount of ATP, the ATP content can clearly indicate the amount of microorganisms and other biological residues in the sample, which is used to judge the sanitary conditions.

Features of ATP fluorescence detector wifi type

Practicality - upper and lower limits can be set according to environmental testing needs to achieve rapid data evaluation and early warning;

By recording the relative light unit value (RLU) of the monitoring surface, the quality of environmental surface cleaning work can be assessed;

High sensitivity - 10-15~10-18mol;

Fast speed - conventional culture method takes more than 18-24 hours, while ATP only takes more than ten seconds;

Feasibility - There is a clear correlation between the number of microorganisms and the ATP contained in the microorganisms. By detecting the ATP content, the number of microorganisms in the reaction can be indirectly obtained;

Operability - traditional culture methods need to be operated by trained technicians in the laboratory; and ATP rapid cleanliness detection is very simple to operate, and only simple training is required for general staff to perform on-site operations;

Better experience - the test tube adopts a plug-in flexible design, which can be cleaned regularly for long-term use to extend the life of the instrument;

Data export - the instrument is equipped with a host computer software, connected to the computer via a data cable, Output the stored data in the form of Excel tables;

Data upload - the instrument can connect to the WIFI network or mobile phone hotspot, and directly upload the test data to the designated supervision platform, and it is equipped with a cloud data management platform as standard;

ATP fluorescence detector wifi type technical indicators

1. Display screen: 3.5-inch capacitive touch display screen, real-time display of the current charging status and battery status of the system;

2. Operating system: Android4.4.2 operating system, the main control adopts a multi-core processor, the CPU main frequency ≥1.88Ghz, the operation speed is faster and the stability is stronger;

3. Wireless upload: WIFI, Bluetooth, mobile phone hotspot and other methods to quickly upload data to the supervision platform, and it is equipped with a cloud data management platform as standard;

4. Detection accuracy: 1×10-18mol;

5. Detection range: 0-99999RLUs;

6. Detection time: 15 seconds;

7. Background noise value: ≤6RLU (n=10);

8. Detection limit: 9.4×10-15molATP , RLU reading is ≤2;

9. Repeatability: When the instrument reading is about 100RLU, the relative standard deviation of repeated measurements is ≤2.3% (n=10);

10. Linear error: When the instrument reading is about 100RLU, the linear error of the measurement is ≥-3.6%;

11. Operating temperature range: 5℃ to 40℃;

12. Operating humidity range: 20-85﹪;

13. ATP recovery rate: 90-110%;

14. Detection mode: RLU;

15 , Data storage: RAM>4GB, can store data for a long time, can store more than 80,000 data;

16. Automatically judge whether it is qualified or not;

17. Can set upper and lower limits;

18. Automatically calculate the qualified rate;

19. Built-in self-calibration light source;

20. Self-check for 30 seconds after power on;

21. Equipped with miniUSB interface, can directly connect to the computer through the data cable to export data, no external software is required;

22. With time display, automatic time calibration when connected to the network;

23. Built-in network browser, After going online, you can search Baidu for relevant literature on ATP detectors;

24. Instrument size (W×H×D): 188mm×77mm×37mm;

25. Built-in 3200mAh lithium battery for power supply, with a standby time of more than 10 hours;

26. Stable liquid luciferase;

27. Wetted integrated collection swab;

28. Built-in Sogou input method, easy to operate;

29. Meet the JJF1828-2020 ATP fluorescence detector calibration specification, and the instrument has a test report from the Institute of Metrology;

30. Meet the WS/T512-2016 Medical Institution Environmental Surface Cleaning and Disinfection Management Specification, A.1.2.3 Record the relative light unit value (RLU) of the monitoring surface to assess the quality of environmental surface cleaning work;

ATP fluorescence detector wifi type use

Widely used in: food and drug supervision, food, medical and health, medicine, medical equipment, daily chemicals, papermaking, industrial water treatment, national defense, environmental protection, water administration, customs entry and exit quarantine and other law enforcement departments and other industries.

ATP fluorescence detector wifi type main configuration description

01, host (handheld) 1 unit

02, USB flash drive (driver, data analysis software) 1 unit

03, PC data cable 1 unit

04, power adapter 1 unit

05, manual 1 unit

06, certificate of conformity, warranty card 1 unit

07, surface detection swabs (20 pcs) 1 unit

08, aluminum alloy suitcase 1 unit

Product's Website：http://en.huoerd.com/atpygjcy/193.html