Separatory Funnel Vertical Shaker

I. Product Overview

The HD-FY6S (FY-series vertical separatory-funnel oscillator) automatically shakes separatory funnels and automatically vents gas during oscillation, completing liquid-liquid extraction and sample mixing. It uses high-quality core components with large amplitude and high speed; the working time is settable and the frequency is adjustable. It processes samples in batches with high efficiency and high recovery, minimizes operators' exposure to chemical reagents to protect personal safety, and runs smoothly, reliably and quietly.

II. Applicable Standards

GB/T 16488-1996 Water quality — Determination of petroleum oils and animal and vegetable oils — Infrared photometric method

HJ 1051-2019 Soil — Determination of petroleum oils — Infrared spectrophotometric method

HJ 637-2018 Water quality — Determination of petroleum oils and animal and vegetable oils — Infrared spectrophotometric method

HJ 970-2018 Water quality — Determination of petroleum oils — Ultraviolet spectrophotometric method

III. Key Features

Oscillation mode: vertical oscillation or inclined oscillation selectable.

Equipped with a servo motor.

Operation: for the auto-venting model, the set speed, actual speed, set time and remaining time are displayed on the same screen without switching between screens — simple to operate and intuitive to observe. The operation interface has an encryption lock to avoid repeated operation and human error.

Elastic stepless-adjustable one-piece clamp that slides freely, suitable for separatory funnels, colorimetric tubes, test tubes, centrifuge tubes and other containers.

Equipped with a front protective plate for safe use.

Stainless steel design, acid- and alkali-resistant and corrosion-resistant.

High-quality rod-type bearing for long-term durability.

For the auto-venting model, gas is vented automatically during the experiment; the venting time is settable, and the extraction count, time and rotation speed can be set with segmented programs.

In the auto-venting model, each channel has an independent solenoid valve; the number of solenoid valves equals the number of positions and the waste gas is collected independently, avoiding cross-contamination of samples caused by sharing a single solenoid valve (many products on the market use one shared solenoid valve to save cost, so that when closed different samples fill the same pipeline and can flow between different sample bottles, causing cross-interference; because the solenoid valve is inside the device and cannot be seen by eye, substandard equipment is easily purchased).

Optional separatory funnels enable fast docking.

IV. Technical Parameters