Swimming pool water quality bacteria detector

Product Introduction

The swimming pool water quality bacteria detector can quickly detect the content of microorganisms and bacteria in various water qualities. The swimming pool water quality bacteria detector is a newly upgraded product with a large touch screen instead of traditional buttons. The operation uses a biochemical reaction method to detect the ATP content. The ATP fluorescence detector is based on the principle of firefly luminescence and uses the "luciferase-luciferin system" to quickly detect adenosine triphosphate (ATP). The ATP swab contains a reagent that can lyse the cell membrane, which can release ATP in the cell and react with the specific enzyme contained in the reagent to produce light. The luminescence value is then detected by a fluorescent illuminometer. The number of microorganisms is proportional to the luminescence value. Since all living cells contain a constant amount of ATP, the ATP content can clearly indicate the amount of microorganisms and other biological residues in the sample, which is used to judge the sanitary conditions.

Instrument characteristics

Practicality - The upper and lower limits can be set according to the environmental detection requirements to achieve rapid data evaluation and early warning, and rapid screening of surface cleanliness.

High sensitivity - 10-15～10-18 mol

Fast speed - Conventional culture method takes more than 18-24 hours, while ATP only takes more than ten seconds.

Feasibility - There is a clear correlation between the number of microorganisms and the ATP contained in the microorganisms. By detecting the ATP content, the number of microorganisms in the reaction can be indirectly obtained

Operability - Traditional culture methods need to be operated by trained technicians in the laboratory; while ATP rapid cleanliness detection is very simple and can be operated on-site by general staff with simple training.

Better experience - The test tube adopts a plug-in flexible design, which can be cleaned regularly for long-term use to extend the life of the instrument.

Main parameters

1. Display screen: 3.5-inch high-precision graphic touch screen

2. Processor: 32-bit high-speed data processing chip

3. Detection accuracy: 1×10-18mol

4. Coliform bacteria: 1-106cfu

5. Detection range: 0 to 9999 RLUs

6. Detection time: 15 seconds

7. Detection interference: ±5﹪ or ±5 RLUs

8. Operating temperature range: 5℃ to 40℃

9. Operating humidity range: 20-85﹪

10. ATP recovery rate: 90-110%

11. Detection mode: RLU, coliform bacteria screening

12. 50 user ID settings

13. The number of settable result limits: 251

14. Automatic judgment of qualified and unqualified

15. Automatic statistics of qualified rate

16. Built-in self-calibration light source

17. Self-test for 30 seconds after power on

18. Equipped with miniUSB interface, the results can be uploaded to PC

19. Equipped with special software to drive USB flash drive instead of traditional CD

20. Instrument size (W×H×D): 188 mm×77mm×37mm

21. Use rechargeable lithium battery without battery replacement

22. Standby state (20℃): 6 months

24. Stable liquid luciferase

25. Wetted integrated collection swab

Swimming pool water quality bacteria detector has a wide range of uses and can be used in: food, medical and health, medicine, daily chemicals, papermaking, industrial water treatment, national defense, environmental protection, water administration, customs entry and exit quarantine and other law enforcement departments and other industries.

Random configuration: swimming pool water quality bacteria detector (handheld) host, instrument bag, lanyard, PC data cable, data analysis software

Product's Website：http://en.huoerd.com/ycszjcy/838.html