Portable dust particle counter

Product Introduction:

The HD-CL10A intelligent dust particle counter, with its confidence measurement verification standard, automatically judges the purification level according to the conditions specified in the national standard GB/T6167-2007 and the calibration specification JJF1190-2008. One sampling can simultaneously measure the number of dust particles in six particle size channels, and simultaneously display the number of particles in the six particle size channels and their changes.

Scope of application:

Meet the pharmaceutical industry (pharmaceutical factories, drug testing institutes, hospital operating rooms, etc.); electronics industry (semiconductor factories, production and processing of precision machinery, etc.); food hygiene industry (finishing of dairy products, plastic-sealed meat foods, seasoning foods, agricultural products, etc.); filter manufacturers, test the quality and efficiency of filters, etc.; detection needs of clean rooms (areas) required for finishing and precision testing in the fields of optics, aerospace, etc.

Based on the standard:

National standard: GB/T6167-2007 Performance test method for dust particle counter

Cleanliness level determination standard: ISO14644 FS209E, new version of GMP (dynamic/static)

Calibration specification: JJF-1190-2008

Features of HD-CL10A dust particle counter:

1. Android system version 7.1, better operation and interaction experience.

2. Built-in temperature and humidity sensor, ambient air pressure sensor

3. The core component light scattering sensor significantly eliminates the stray light of the cavity, and the signal-to-noise ratio is greatly improved. This makes the measurement more accurate and reliable.

4. Calculated according to 95% confidence level (UCL), the counting result can be converted into m3 and ft3

5. According to the purification level division and regulations, the purification level is automatically determined, which is convenient to use.

6. With audit tracking function, it can be queried, traced and controlled, and complies with FDA 21CFR PART11 regulations

7. Supports wifi and Bluetooth transmission, and data can be uploaded wirelessly; it also supports USB copying of data, without driver plugging and unplugging.

8. Configure the supervision platform, and the test results can be directly transmitted to the platform wirelessly for long-term and short-term cleanliness analysis and auxiliary management.

9. Built-in new generation high-speed thermal printer, you can select the particle size channel to be printed, and print the results flexibly.

10. AC and DC dual-use, built-in rechargeable lithium battery, environmentally friendly and durable, can support continuous sampling for more than 6 hours.

11. Convenient and simple telescopic pan-tilt bracket, installation and sampling operation are more convenient.

Technical indicators:

Sampling volume: 2.83L/min (0.1cfm)

Six particle size channels: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 (μm)

Self-cleaning time: ≤10min

Particle size distribution error: 0.5um 5um ≤±30%

Particle concentration indication error: 0.5um ≤±30%

Measurement repetition relative deviation: ≤±10%

Use environment: working environment 15~35℃, 10-85%RH

Sampling cycle: can be set arbitrarily from 1 second to 99min

Sampling delay: ≤99s

Measurement interval: ≤999s

Sampling mode: single, ≤99 times (customized), continuous

Alarm level: Class100~Class300,000 (FED209E Standard); or 5 to 9 (ISO14464-1 standard)

Light source: imported semiconductor laser diode (lifespan greater than 30,000 hours)

Screen display: 7-inch color touch screen

Charging time: 2 hours

Design working time: 8 hours

Average power: 7.5W

Built-in battery: 74Wh (16.8V/5Ah)

Charger: 50W (16.8V/3A)

Product's Website：http://en.huoerd.com/calzjsq/1698.html