Gas Chromatograph

Model：

GC-610

Introduction：

Gas Chromatograph (GC) separates and analyzes volatile compounds with precise PID temperature control and a 7-inch touch screen. Widely used in environment, disease control, food, petrochemical, chemical, electric power and research fields....

+86 19053605658 Consultation icon

Image and Text Display
Technical Specifications
Product video

Product Introduction

The GC-610 Gas Chromatograph is a high-performance laboratory gas chromatography system. With an advanced PID temperature control system, a stable gas path design and a powerful data workstation, it delivers reliable qualitative and quantitative analysis of complex samples. The instrument adopts a 7-inch touch-screen display, supports network remote control and automatic FID ignition, and is widely used in environmental protection, disease control, food, quality supervision, mining and energy, petroleum refining, chemical engineering, health, electric power and liquor analysis, as well as in universities and research institutes.

Product Features

7-inch touch-screen LCD display for real-time display.
Core temperature control technology: PID temperature control system built on bus technology with a dedicated control chip; dual hardware and software over-temperature protection makes the temperature control system durable and reliable over long operating periods.
Diaphragm-type pressure-stabilizing valve assembly: shock and drop resistant, highly stable, with stable output flow; the fluorine-rubber sealing gasket is corrosion-resistant and long-lasting.
Carrier gas pressure protection: when the gas pressure falls below 0.4 MPa the instrument automatically cuts off the power supply, effectively protecting the chromatographic column.
Advanced 10/100 M adaptive Ethernet communication interface supporting network remote control.
Automatic FID ignition, flame-out monitoring and automatic triggering.
Rear-door automatic cooling system that adjusts the required opening angle by temperature compensation.
Network remote control support: all instrument parameters can be controlled through PC remote-control software with digital transmission and two-way communication, eliminating the need for an external acquisition card in the workstation; an analog output port is also reserved to support connection to any chromatography workstation.

Main Technical Parameters

Parameter	Specification
Temperature control zones	7 zones
Temperature control accuracy	±0.1℃ to ±0.2℃
Temperature control range	Room temperature +8℃ to 450℃, in 1℃ increments
Programmed temperature rise	16-step programming; heating rate 0.1-40℃/min in 0.1℃ increments; initial and final time range 0-6000 min in 1 min increments
Limit temperature	Maximum protection value 450℃
External events	6 channels
Gas path control	Mechanical valve control
Detectors	3 (2 × FID, 1 × TCD)
Injectors	Up to 3 (packed-column injector, capillary-column injector, valve injection)
Power supply	220V 50Hz 3000 W

Detector Specifications

Item	Specification
Detector	Hydrogen flame ionization detector (FID)
Detection limit	Mt ≤ 5×10⁻¹¹ g/s (n-hexadecane / isooctane solution)
Noise	≤ 5×10⁻¹⁴ A
Drift	≤ 1×10⁻¹³ A/30 min
Ignition mode	Automatic ignition
Detector	Thermal conductivity detector (TCD)
Sensitivity	S ≥ 3500 mV·ml/mg (standard); 5000 mV·ml/mg (high sensitivity) (benzene-toluene solution)
Noise	≤ 0.01 mV
Baseline drift	≤ 0.03 mV/30 min
Linear range	≥ 10⁴

Wide-range mode: the FID supports a wide-range operating mode for both trace and high-concentration measurements.

The video is currently in production, please stay tuned......

Gas Chromatograph

Product Introduction

Product Features

Main Technical Parameters

Detector Specifications

Shandong Horde Electronic Technology Co., Ltd.

whatsapp

wechat