EN
Position:Home>Products>Water Quality Testing>Online Water Monitoring>Online Instruments>Online Salinity Meter

Products

Online Salinity Meter

Model:

HD-ZXNaCl

Introduction:

Online Salinity Meter measures the total salt content of water using a conductivity sensor and the salinity-conductivity relationship. Widely used for seawater, aquaculture, drinking water and industrial water monitoring....

  • Image and Text Display
  • Technical Specifications
  • Product video

I. Product Overview

The salinity meter is an instrument that uses a conductivity sensor to measure the total salt content of water. The conductivity of an electrolyte solution is the conductance of a 1 cm cube of solution between two parallel electrodes 1 cm apart. Once the conductivity (EC) is known, the salinity value can be obtained from the relationship between salinity and conductivity.

II. Key Features

1. LCD screen with a Chinese interface, making operation simple and convenient.

2. High-precision 24-bit ADC signal acquisition and anti-interference circuit for higher precision and greater stability.

3. Photoelectrically isolated 4–20 mA current output and RS-485 / RS-232 communication interface.

4. Optional upper-computer online acquisition software from our company for data acquisition and analysis.

5. One-key calibration with standard solution; built-in watchdog with data retention exceeding 10 years after power failure.

6. Dual-relay upper and lower limit alarm output.

7. Physical measurement method; no electrolyte consumption and no periodic maintenance.

8. Special functional requirements can be customised.

III. Technical Specifications

Measuring range0–200 mg/L, 0–2,000 mg/L, 0–20 g/L, 0–50 g/L
Resolution0.1 mg/L, 0.01 g/L
Power supplyAC 220 V / DC 24 V, input power ≥ 5 W
OutputRS485, 4–20 mA, relay (optional), HART protocol (optional), NB / GPRS / LORA communication (optional)
Protection classIP65 (controller) / IP68 (sensor)
Operating temperature0–60 °C (non-freezing)
Storage temperature−10–60 °C
InstallationTop-mount / top flange / side-wall / pipe / immersion
Controller dimensionsWall-mounted, 156 × 150 × 85 mm
Cut-out sizeWall-mounted, 156 × 94 mm
Cable length10 m standard (extendable on request)
The video is currently in production, please stay tuned......

Shandong Horde Electronic Technology Co., Ltd.

  • Phone:008619053605658

  • Email:salesmanager@hordeinstrument.com

whatsapp

Copyright © Shandong Horde Electronic Technology Co., Ltd. All Rights Reserved.
Disclaimer: This website cannot identify the intellectual property rights of uploaded images or text. If there is any infringement, please notify us in a timely manner, and this website will review and delete it as soon as possible.

Phone

008619053605658

Contact
Top