Products
Model：
HD-CuLZ
Introduction：
Online Copper Ion Analyzer measures copper ions in liquids with an ion-selective membrane and 24-bit ADC for precise measurement. Widely used for drinking water, wastewater, environmental protection and industrial water monitoring....
The online copper ion analyzer is a precision instrument for the determination of copper ion concentration in liquids. A copper ion selective membrane is fitted at the front of the sensor. When the sensor is immersed in the sample, copper ions in the sample diffuse through the selective membrane into the internal electrolyte, where the cation activity rises and creates a small potential difference against the reference electrode. This potential difference is proportional to the copper ion concentration. The circuit amplifies the potential difference and converts it into a direct concentration reading.
1. LCD screen with a Chinese interface, making operation simple and convenient.
2. High-precision 24-bit ADC signal acquisition and anti-interference circuit for higher precision and greater stability.
3. Photoelectrically isolated 4–20 mA current output and RS-485 / RS-232 communication interface.
4. Optional upper-computer online acquisition software from our company for data acquisition and analysis.
5. One-key calibration with standard solution; built-in watchdog with data retention exceeding 10 years after power failure.
6. Dual-relay upper and lower limit alarm output.
7. The sensor is temperature-compensated, which corrects the influence of temperature on the measured value.
8. Special functional requirements can be customised.
| Measuring range | 0–2,300 mg/L |
| Resolution | 0.1 mg/L |
| Accuracy | ±2 % of calibration value |
| Power supply | AC 220 V / DC 24 V, input power ≥ 5 W |
| Output | RS485, 4–20 mA, relay (optional), HART protocol (optional), NB / GPRS / LORA communication (optional) |
| Protection class | IP65 (controller) / IP68 (sensor) |
| Operating temperature | 0–40 °C (non-freezing) |
| Storage temperature | −10–40 °C |
| Installation | Top-mount / top flange / side-wall / pipe / immersion |
| Controller dimensions | Wall-mounted, 156 × 150 × 85 mm |
| Cut-out size | Wall-mounted, 156 × 94 mm |
| Cable length | 10 m standard (extendable on request) |
Products
Services
About
Contact
Copyright © Shandong Horde Electronic Technology Co., Ltd. All Rights Reserved.
Disclaimer: This website cannot identify the intellectual property rights of uploaded images or text. If there is any infringement, please notify us in a timely manner, and this website will review and delete it as soon as possible.
008619053605658
Agricultural Testing
Packaging Testing
Water Quality Testing
Physical Performance Testing
Microbiological Testing
Cleanliness Analysis
Gas Detection
Sample Pretreatment
Spectral Analysis
Laboratory Analysis
Food Rapid Test
Atmospheric Environment Analysis
Biochemical Analysis
Chromatography Analysis
Hydrological Measurement
Surveying & Mapping
Other Specialized
+86 19053605658
WhatsApp
