EN
Position：Home>Products>Water Quality Testing>Online Water Monitoring>Online Instruments>Online Bromide Ion Analyzer

Products

Online Bromide Ion Analyzer

Model：

HD-BrlZ

Introduction：

Online Bromide Ion Analyzer measures bromide ions in liquids with an ion-selective membrane and 24-bit ADC for precise measurement. Widely used for drinking water, wastewater, environmental protection and industrial water monitoring....

Tel icon+86 19053605658 Consultation iconWhatsApp
  • Image and Text Display
  • Technical Specifications
  • Product video

I. Product Overview

The online bromide ion analyzer is a precision instrument for the determination of bromide ion concentration in liquids. A bromide ion selective membrane is fitted at the front of the sensor. When the sensor is immersed in the sample, bromide ions in the sample diffuse through the selective membrane into the internal electrolyte, where the cation activity rises and creates a small potential difference against the reference electrode. This potential difference is proportional to the bromide ion concentration. The circuit amplifies the potential difference and converts it into a direct concentration reading.

II. Key Features

1. LCD screen with a Chinese / English interface, making operation simple and convenient.

2. Imported TI chip and anti-interference circuit for higher precision and greater stability.

3. Photoelectrically isolated 4–20 mA current output and RS-485 / RS-232 communication interface.

4. Adjustable hysteresis (dead band) prevents the relay from switching too frequently.

5. Built-in watchdog; data retention after power failure exceeds 10 years.

6. Dual-relay upper and lower limit alarm output.

7. The sensor is temperature-compensated, which corrects the influence of temperature on the measured value.

8. Special functional requirements can be customised.

III. Technical Specifications

Measuring range0–18,000 ppm
Resolution1 ppm
Accuracy±2 % of calibration value
Power supplyAC 220 V / DC 24 V, input power ≥ 5 W
OutputRS485, 4–20 mA, relay (optional), HART protocol (optional), NB / GPRS / LORA communication (optional)
Protection classIP65 (controller) / IP68 (sensor)
Operating temperature0–40 °C (non-freezing)
Storage temperature−10–40 °C
InstallationTop-mount / top flange / side-wall / pipe / immersion
Controller dimensionsWall-mounted, 156 × 150 × 85 mm
Cut-out sizeWall-mounted, 156 × 94 mm
Cable length10 m standard (extendable on request)
The video is currently in production, please stay tuned......
Related Products

Shandong Horde Electronic Technology Co., Ltd.

  • Phone:008619053605658

  • Email:salesmanager@hordeinstrument.com

whatsapp

Copyright © Shandong Horde Electronic Technology Co., Ltd. All Rights Reserved.
Disclaimer: This website cannot identify the intellectual property rights of uploaded images or text. If there is any infringement, please notify us in a timely manner, and this website will review and delete it as soon as possible.

Phone

008619053605658

Contact
Top