EN
Position:Home>Products>Water Quality Testing>Online Water Monitoring>Online Instruments>Industrial pH Meter

Products

Industrial pH Meter

Model:

HD-P3001

Introduction:

Industrial pH Meter measures the pH of liquids based on the galvanic cell principle for precise online measurement. Widely used in wastewater treatment, chemical, power, food, pharmaceutical and water treatment industries....

  • Image and Text Display
  • Technical Specifications
  • Product video

I. Product Introduction

The online industrial pH meter is a precision instrument for measuring the acidity and alkalinity of liquids, based on the working principle of a primary cell. According to Nernst's law, the electromotive force between the two electrodes of the cell depends both on the properties of the electrodes themselves and on the hydrogen ion concentration of the solution. The negative logarithm of the hydrogen ion concentration is the pH value.

II. Product Features

1. LCD screen with a Chinese interface for simpler and more convenient operation.

2. High-precision 24-bit ADC signal acquisition and anti-interference circuitry for higher accuracy and better stability.

3. Optically isolated 4–20 mA current output and RS-485/RS-232 communication interface.

4. Optional host-computer online acquisition software for data acquisition and analysis.

5. One-key calibration with standard solutions; built-in watchdog and power-failure protection for more than 10 years.

6. Dual-relay high/low limit alarm output.

7. The sensor has built-in temperature compensation to correct the influence of temperature on the pH value.

8. Special functional requirements can be customized.

III. Technical Parameters

Measurement range0–14 or -2 to 16 pH
Resolution0.01 pH; 1 mV; 0.1 °C
Supply voltageAC 220 V, DC 24 V; input power ≥5 W
OutputRS485, 4–20 mA, relay (optional), HART protocol (optional), NB/GPRS/LORA communication (optional)
Protection classIP65 (main unit) / IP68 (sensor)
Operating temperature0–60 °C (non-freezing)
Storage temperature-10 to 60 °C
InstallationTop-mounted / top flange / side wall / pipe / immersion / flow-through
DimensionsWall-mounted 156 mm × 150 mm × 85 mm
Cut-out sizeWall-mounted 156 mm × 94 mm
Cable length10 m as standard (extendable on request)
The video is currently in production, please stay tuned......

Shandong Horde Electronic Technology Co., Ltd.

  • Phone:008619053605658

  • Email:salesmanager@hordeinstrument.com

whatsapp

Copyright © Shandong Horde Electronic Technology Co., Ltd. All Rights Reserved.
Disclaimer: This website cannot identify the intellectual property rights of uploaded images or text. If there is any infringement, please notify us in a timely manner, and this website will review and delete it as soon as possible.

Phone

008619053605658

Contact
Top