ATP fluorescence detector Update time：2025-06-14

Water microbial detection equipment

Model：HED-ATP

Price：Please contact customer service for discounted prices

manufacturer：Shandong Horde Electronic Technology Co., Ltd.

Introduction：The manufacturer of Water microbial detection equipment「Horde Electronic」 has mastered the research and development technology of Water microbial detection equipment, with more than 10 years of experience in manufacturing Water microbial detection equipment. The quality is reliable, the detection accuracy is high, and the price competitive advantage of the source manufacturer is obvious. Welcome to call for more information.

Update time：2025-06-14

Contact： Contact Information
Phone：008618863942319

Product Recommendation

Product Details

Introduction to water microbial detection instrument

The water microbial detection instrument is an upgraded product developed and launched by Shandong Holder Electronics. It has a large touch screen instead of traditional buttons. The operation uses a biochemical reaction method to detect the ATP content. The ATP fluorescence detector is based on the principle of firefly luminescence. The ATP rapid bactericidal effect detection method is based on the ATP (adenosinetriphosphate) triphosphonic acid acyl glycoside detection principle, and uses the "luciferase-luciferin system" to quickly detect adenosine triphosphate (ATP). The ATP swab contains a reagent that can lyse the cell membrane, which can release ATP in the cell and react with the specific enzyme contained in the reagent to produce light. The luminescence value is then detected by a fluorescent illuminometer. The number of microorganisms is proportional to the luminescence value. Since all living cells contain a constant amount of ATP, the ATP content can clearly indicate the amount of microorganisms and other biological residues in the sample, which is used to judge the sanitary conditions.

Features of water microbial detection instruments

Practicality - upper and lower limits can be set according to environmental detection needs to achieve rapid data evaluation and early warning;

By recording the relative light unit value (RLU) of the monitoring surface, the quality of environmental surface cleaning work can be assessed;

High sensitivity - 10-15~10-18mol;

Fast speed - conventional culture method takes more than 18-24 hours, while ATP only takes more than ten seconds;

Feasibility - There is a clear correlation between the number of microorganisms and the ATP contained in the microorganisms. By detecting the ATP content, the number of microorganisms in the reaction can be indirectly obtained;

Operability - traditional culture methods need to be operated by trained technicians in the laboratory; and ATP rapid cleanliness detection is very simple and can be operated on-site by general staff with simple training;

Better experience - the test tube adopts a plug-in flexible design, which can be cleaned regularly for long-term use to extend the life of the instrument;

Data export - the instrument is equipped with a host computer software, which is connected to the computer via a data cable to output the stored data in the form of an Excel table.

Technical indicators of water microbial detection instrument

1. Display screen: 3.5-inch capacitive touch display screen, real-time display of the current charging status of the system and the battery status;

2. Operating system: 32-bit high-speed data processing chip;

4. Detection accuracy: 1×10-18mol;

5. Detection range: 0-99999RLUs;

6. Detection time: 15 seconds;

7. Background noise value: ≤6RLU (n=10);

8. Detection limit: 9.4×10-15molATP, RLU indication value ≤2;

9. Repeatability: Instrument indication When the value is about 100RLU, the relative standard deviation of repeated measurements is ≤2.3% (n=10);

10. Linear error: When the instrument indicates about 100RLU, the linear error of the measurement is ≥-3.6%;

11. Operating temperature range: 5℃ to 40℃;

12. Operating humidity range: 20-85﹪;

13. ATP recovery rate: 90-110%;

14. Detection mode: RLU;

15. 50 user ID settings, the number of settable result limits: 251;

16. Automatic judgment of qualified and unqualified;

17. The upper and lower limits can be set;

18. Automatic statistics of qualified rate;

19. Built-in self-calibration light source;

20. Self-test for 30 seconds after power on;

21. Equipped with miniUSB interface, data can be directly connected to the computer via a data cable to export data without external software;

24. Instrument size (W×H×D): 188mm×77mm×37mm;

25. Built-in 3200mAh lithium battery power supply, standby time up to more than 10 hours;

26. Stable liquid luciferase;

27. Wet integrated collection swab;

28. Meets JJF18 28-2020ATP fluorescence detector calibration specification, the instrument has a test report from the Institute of Metrology;

29. Meet WS/T512-2016 Medical Institution Environmental Surface Cleaning and Disinfection Management Specifications, A.1.2.3 Record the relative light unit value (RLU) of the monitoring surface to assess the quality of environmental surface cleaning work;

Use of water microbial detection instrument

Widely used in: food and drug supervision, food, medical and health, medicine, medical equipment, daily chemicals, papermaking, industrial water treatment, national defense, environmental protection, water administration, customs entry and exit quarantine and other law enforcement departments and other industries.

Main configuration description of water microbial detection instrument