Products
Model：
CHP-160S
Introduction：
CO2 Incubator (Water-jacket Type) provides a stable, uniform temperature and CO2 environment for cell and tissue culture. Widely used in medical, pharmaceutical, biological research and university laboratories for cell culture....
The CHP-80S and CHP-160S Carbon Dioxide Incubators (water-jacket type) have an outer shell made of high-quality cold-rolled steel plate with a spray-coated surface; the inner chamber and shelves are made of high-quality stainless steel plate and wire, beautiful and practical; a micro-circulation fan is installed at the top of the inner chamber to make the temperature distribution inside uniform. A microprocessor-based temperature controller with digital temperature display is adopted, which is intuitive, clear and accurate, with over-temperature protection. The carbon dioxide concentration is controlled by a gas-mixing type control and works reliably. After the door is opened and closed again, the carbon dioxide is rapidly replenished by microprocessor control, so that the CO2 concentration inside the chamber quickly returns to the required value.
Carbon dioxide incubators are used in laboratories of hospitals, production units and scientific research institutions for the cultivation of cells, tissues, bacteria and microorganisms.
The incubator consists of an outer door, a glass door, an inner chamber, a gentle-air-circulation fan, an electric heater and a control section with a control panel. The control section is composed of two parts. The first part is the temperature control part: the temperature sensor sends the temperature signal to the microprocessor, which controls the chamber temperature and the door temperature (to prevent condensation on the glass door). The second part is the carbon dioxide gas control part: a gas pump mixes a certain flow of air (regulated by an air flow meter) and a certain flow of carbon dioxide gas (regulated by a CO2 flow meter) into CO2 gas of a certain concentration and feeds it into the incubator.
| Parameter | Specification |
|---|---|
| Temperature control range | +5℃ to 50℃ |
| Temperature control error | ±0.5℃ (at 37℃) |
| Temperature fluctuation | ±0.5℃ (at 37℃) |
| Temperature display error | ±0.5℃ (at 37℃) |
| Over-temperature alarm | When the displayed temperature exceeds the set value by 1.0℃, the alarm is triggered automatically and the heating power is cut off |
| Chamber relative humidity | ≥ 92% (water tray evaporation) |
| Rated power | ≤ 550 VA |
| Fuse | F3A/250V, Φ5 × 20 |
| Inner chamber dimensions | 500 × 500 × 650 mm³ |
| Chamber volume | 160 L |
Products
Services
News
About
Contact
Copyright © Shandong Horde Electronic Technology Co., Ltd. All Rights Reserved.
Disclaimer: This website cannot identify the intellectual property rights of uploaded images or text. If there is any infringement, please notify us in a timely manner, and this website will review and delete it as soon as possible.
008619053605658
Water Quality Testing
Spectral Analysis
Laboratory Analysis
Physical Performance Testing
Sample Pretreatment
Food Rapid Test
Agricultural Testing
Packaging Testing
Gas Detection
Microbiological Testing
Cleanliness Analysis
Atmospheric Environment Analysis
Biochemical Analysis
Chromatography Analysis
Hydrological Measurement
Surveying & Mapping
Other Specialized
+86 19053605658
WhatsApp
