Products
Model：
CHP-160
Introduction：
CO2 Incubator (Air-jacket Type) provides a stable temperature and CO2 environment for cell and tissue culture. Widely used in medical, pharmaceutical, biological research and university laboratories for cell culture and microbiological cultivation....
The CHP-80 and CHP-160 Carbon Dioxide Incubators (air-jacket type) have an outer shell made of high-quality cold-rolled steel plate with a spray-coated surface; the inner chamber and shelves are made of high-quality stainless steel plate and wire, beautiful and practical; a micro-circulation fan is installed at the top of the inner chamber to make the temperature inside uniform. A microprocessor-based temperature controller with digital temperature display is adopted, intuitive, clear and accurate, with over-temperature protection. The carbon dioxide concentration is controlled by a gas-mixing type control and works reliably. After the door is opened and closed again, the carbon dioxide is rapidly replenished by microprocessor control, so that the CO2 concentration inside the chamber quickly returns to the required value.
The carbon dioxide incubator is used in laboratories of hospitals, production and scientific research units for the culture of cells, tissues, bacteria and microorganisms.
The incubator consists of an outer door, a glass door, an inner chamber, a gentle-air-circulation fan, an electric heater and a control part with a control panel. The control part consists of two main sections: the first is the temperature control section, in which the temperature sensor sends the temperature signal to the microprocessor to control the chamber temperature and the door temperature (to prevent condensation on the glass door); the second is the carbon dioxide gas control section, in which a certain flow of air (regulated by the air flow meter) and a certain flow of carbon dioxide gas (regulated by the CO2 flow meter) are mixed by an air pump into a certain concentration of CO2 gas and fed into the incubator.
| Parameter | Specification |
|---|---|
| Temperature control range | +5℃ to 50℃ |
| Temperature control error | ± 0.5℃ (at 37℃) |
| Temperature fluctuation | ± 0.5℃ (at 37℃) |
| Temperature display error | ± 0.5℃ (at 37℃) |
| Over-temperature alarm | When the displayed temperature exceeds the set value by 1.0℃, an alarm is automatically given and the heating power is cut off |
| Rated power | ≤ 550 VA (CHP-160) |
| Fuse | F3A/250V, φ5 × 20 |
| Inner chamber dimensions | 500 × 500 × 650 mm³, volume 160 L (CHP-160) |
Products
Services
News
About
Contact
Copyright © Shandong Horde Electronic Technology Co., Ltd. All Rights Reserved.
Disclaimer: This website cannot identify the intellectual property rights of uploaded images or text. If there is any infringement, please notify us in a timely manner, and this website will review and delete it as soon as possible.
008619053605658
Water Quality Testing
Spectral Analysis
Laboratory Analysis
Physical Performance Testing
Sample Pretreatment
Food Rapid Test
Agricultural Testing
Packaging Testing
Gas Detection
Microbiological Testing
Cleanliness Analysis
Atmospheric Environment Analysis
Biochemical Analysis
Chromatography Analysis
Hydrological Measurement
Surveying & Mapping
Other Specialized
+86 19053605658
WhatsApp